Metallisation Nord Industrie
Type of deposit
Composite base PTFE
Polytetrafluoroethylene (PTFE) is a fluoropolymer derived from tetrafluoroethylene. It has outstanding resistance to most chemicals, it has an extremely low friction coefficient and remains stable at high temperature.
EN SAVOIR PLUS
The process of PTFE
We make sandblasting the surface prior to coating to create tiny micro-scratches. Then, a primary layer of Teflon that is thin enough to flow in the micro-scratches is sprayed. The surface is then baked at high temperature (380 ° C) to create a secure grip. Finally, the Teflon is applied and baked again. This creates a strong enough grip to scratches.
The process of Slidcoat II
The Slidcoat II is composed of a tungsten carbide-based matrix in which a PTFE film fills cavitations carbide. It being extremely hard and resistant to shock, it will increase the life of the PTFE by x10 or x20.
Click on the image below to
Search by coating :
Contact
Opening schedules
We welcome you from Monday to Thursday from 8h to 12h and from 13h to 17h on Friday from 8h to 12h and from 13h to 16h
Address
51b rue d’arcole 59000 Lille - France
Contact
Tél. : +33 3 28 38 05 50 Mail : contact@mni-hi-tech.com Fax : +33 3 20 30 98 72
